Heavy Duty SSI Output Converter NCV-220HSSI

NCV-220HSSI is the ABSOCODER converter which is compatible with SSI (Synchronized Serial Interface).This converter is digital binary or gray code output converter which is connecting with heavy duty ABSOCODER position sensors.The host controller can read this position data in SSI signals.

　　　

NCV-220HSSI[1]

[1]Applicable sensor

Code	Applicable sensor
V1R	VRE-P061/074/101
M2R	MRE-32SP061/074/101 MRE-G□SP061/074/101
LC	CYLNUC,Inrodsensor(IRS-51.2P, IRS-32.8P)
L8	VLS-8SM

General specification

Item	Specification
Power supply voltage	24VDC±10% (including ripple)
Power consumption	10W or less
Insulation resistance	20MΩ or more between external DC power terminals and ground (by 500 VDC insulation resistance tester)
Withstand voltage	500 VAC, 60Hz for 1 minute between external DC power terminals and ground
Vibration resistance	20m/s2 10〜500Hz, 10cycles of 5 minutes in 3 directions, conforms to JIS C 0040 standard
Ambient operating temperature	0 ～ +55℃ (No freezing) (Surrounding air temperature rating of 55℃ maximum)
Ambient operating humidity	20 ～ 90 %RH (No condensation)
Ambient operating environment	Free from corrosive gases and excessive dust
Ambient storage temperature	-10〜+70℃
Grounding	Must be securely grounded (ground resistance of 100 ohm or less)
Construction	Book-shelf type within enclosure, DIN rail mountable
Outside dimension (mm)	39(W)×155(H)×93(D) Refer to dimensions for details.
Mass	Approx. 0.4kg

Performance Specification

Item	Specification
Converter model	NCV-220HSSIV1R, NCV-220HSSIM2R, NCV-220HSSILC, NCV-220HSSIL8
Number of detection axes	2
Position data sampling time	0.2ms
Position data increase /decrease direction setting	CW or CCW (switchable)
Front panel function	Zero point setting, error clear
Switch (on rear face of product)	Position data increase direction setting (CW / CCW), Output code (binary /gray), Axis-2 error detection (enable / disable)
Monitor LED	Display of position data, power supply status, sensor disconnected error, low power supply error, memory error, converter error
Input signals	Axis-1 zero point setting: 1-point Axis-2 zero point setting: 1-point Error clear signal: 1-point
Output signals	Axis-1 system ready signal: 1-point Axis-2 system ready signal: 1-point

SSI communication specification

Item	Specification
Converter model	NCV-220HSSIV1R	NCV-220HSSIM2R	NCV-220HSSILC	NCV-220HSSIL8
Interface	SSI (Synchronized Serial Interface)
Communication format	RS-422 standard
Numbers of channels	2 channels (per sensor axis)
Communication signal	DATA+、DATA-、CLK+、CLK-
Code	Gray / binary
Data length	13-bit	25-bit
Monoflop time	20μs
Transmission speed: cable length	1MHz：20m，500kHz：60m，250kHz：160m，125kHz：320m

Number of divisions, resolution, and sensor cable length of the ABSOCODER sensor

VRE Single-turn type

Item		Specification
Converter model		NCV-220HSSIV1R
Applicable sensor		VRE-P061, VRE-P074, VRE-P101
Total number of turns		1
Number of divisions		8192(213)
Position detection format		Absolute position detection
Max. sensor cable length	Standard(S)	500m
	Robotic (RBT)	250m
	JKPEV-S (1.25mm2×5P)	300m

MRE Multi-turn type

Item		Specification
Converter model		NCV-220HSSIM2R
Applicable sensor		MRE-32SP061	MRE-G□SP061　□：Total number of turns
Total number of turns		32	64	128	160	256	320
Divisions/Turn		4096	2048	1024	819.2	512	409.6
Total number of divisions		131072(217)
Position detection format		Absolute position detection
Max. sensor cable length	Standard(S)	200m	300m
	Robotic (RBT)	100m	150m
	JKPEV-S (1.25mm2×5P)	200m	300m

Item		Specification
Converter model		NCV-220HSSIM2R
Applicable sensor		MRE-32SP074	MRE-G□SP074　□：Total number of turns
Total number of turns		32	64	128	160	256	320
Divisions/Turn		4096	2048	1024	819.2	512	409.6
Total number of divisions		131072(217)
Position detection format		Absolute position detection
Max. sensor cable length	Standard(S)	300m
	Robotic (RBT)	150m
	JKPEV-S (1.25mm2×5P)	300m

Item		Specification
Converter model		NCV-220HSSIM2R
Applicable sensor		MRE-32SP101	MRE-G□SP101　□：Total number of turns
Total number of turns		32	64	128	160	256	320	512	1280	2048	2560	3072
Divisions/Turn		4096	2048	1024	819.2	512	409.6	256	102.4	64	51.2	42.6
Total number of divisions		131072(217)
Position detection format		Absolute position detection
Max. sensor cable length	Standard(S)	300m
	Robotic(RBT)	150m
	JKPEV-S (1.25mm2×5P)	300m

CYLNUC Smart Linear Position Sensing Cylinder

Item		Specification
Converter model		NCV-220HSSILC
Applicable sensor		CYLNUC
Absolute detection range		12.8mm
Resolution		1.5625μm
Position detection format		Semi - absolute position detection
Max. sensor cable length	Standard(S)	200m
	Robotic (RBT)	100m
	JKPEV-S (1.25mm2×5P)	200m

General Purpose Inrodsensor

Item		Specification
Converter model		NCV-220HSSILC
Applicable sensor		IRS-51.2P	IRS-32.8P
Absolute detection range		51.2mm	32.768mm
Resolution		6.25μm	4μm
Position detection format		Semi - absolute position detection
Max. sensor cable length	Standard(S)	200m
	Robotic (RBT)	100m
	JKPEV-S (1.25mm2×5P)	200m

VLS Linear type

Item		Specification
Converter model		NCV-220HSSIL8
Applicable sensor		VLS-8SM
Absolute detection range		8.192mm
Resolution		1μm
Position detection format		Semi - absolute position detection
Max. sensor cable length	Standard(S)	200m
	Robotic (RBT)	100m
	JKPEV-S (1.25mm2×5P)	－

I/O spcification

Item		Specification
Converter model		NCV-220HSSIV1R, NCV-220HSSIM2R, NCV-220HSSILC, NCV-220HSSIL8
Input	Input signals	ZPS1 (axis-1 zero point setting): 1-point ZPS2 (axis-2 zero point setting): 1-point CLR (error clear): 1-point
	Input circuit	DC input, photo-coupler isolation
	Input logic	Negative logic
	Rated input voltage	24VDC
	Rated input current	10mA (24VDC)
Output	Output signals	NOR1 (axis-1 system ready signal): 1-point NOR2 (axis-2 system ready signal): 1-point
	Output circuit	Photo - coupler isolation
	Output logic	Negative logic
	Rated load voltage	24VDC (30VDC max.)
	Max. load current	100mA
	Max. voltage drop when ON	1.5 V or less

• 

Application